Selection Guide
F6200 V2
F6400 V2 F6600 V2 2 Axes Linkage max 4 Axes Linkage max 6 Axes Linkage max Grooveless cutting: round pipe
Groove cutting: round pipe
Cutting without groove: square pipe / channel steel / angle steel / H-shaped steelGroove cutting: round pipe / square pipe / channel steel / angle steel / H-shaped steel
Technical parameter
Control axes | 6 Axes Linkage max |
Control accuracy | ±0.001mm |
Coordinate range | ± 99999.99mm |
Maximum operating speed | 30 M / min |
Minimum time class resolution | 1ms |
System working power supply | DC+24V,Power greater than 150W |
System working environment | temperature-10℃to+60℃ |
relative humidity | 0-95%No condensation |
General output port | 16,200mA(Scalable) |
General input port | 16,(Scalable) |
Hardware configuration
Monitor | 18.5 inch 1366×768 High resolution true color high brightness LCD |
Touch screen | Resistance or capacitance touch |
CPU | Intel I3-6100 |
Memory | 4GB DDR4(Upgradeable) |
Hard disk | 120G SSD SSD (upgradeable) |
Ethernet | 3×Gbe |
USB | 4×USB3.0 2×USB2.0 |
Motion control card configuration
CPU | Zynq serise ARM |
Memory | 512M |
Ethernet | control×1,EtherCAT×1 |
Serial port | 485Interface |
CAN | Expansion port |
F6000 V2 series CNC system absorbs the advantages of many CNC systems at home and abroad, which is more humanized, easier to operate and better in performance. All operations of the system have menu or graphic prompt, which can reduce the learning cost of operators to the greatest extent.
·18.5 "capacitive touch screen, full 3D display (gallery and cutting)
·Win10 system + 128ssd SSD, higher performance configuration
·Remote diagnosis and data statistics
·Industrial Internet of things and cloud MES standard protocol and interface, supporting OPC UA communication
·Service cycle maintenance of vulnerable parts (system display parameters, monitor service life of vulnerable parts, prompt for timely replacement)
·Multiple groove forms support, fixed groove, dynamic groove, AWS, can achieve customized needs of customers
·Based on Ethernet interface board, supporting bus servo
·Optional piping truss engineering application software
·Support power-off protection function
·Support laser detection device deviation correction / sensor height adjustment / pipe ovality correction
·Various mechanical structures support: 2-8 axis linkage, four-bar linkage (double deflection), TCP, infinite rotation of fitting angle, rotation plus deflection
·Support cross chuck function, service cycle maintenance of vulnerable parts (system display parameters)
·Support processing of round pipe, square pipe, angle steel, channel steel, H-shaped steel, head, etc