Selection Guide
Technical Indicator
● Control Axis: 2 axis linkage(3 axis customizable)● Control accuracy: +/-0.001mm● Coordinate range: +/- 99999.99mm● Max pulses: 200 kHz.● Max speed: 15,000 mm/min● Max lines of code: 80,000lines● Max size of single code file: 4M● Time resolution: 10ms● Working Voltage: DC +24V direct-current power input, power > 80W。● Working Temperature: -10℃~+60℃. Relative Humidity, 0~95%.● Max power of drive arc THC motor: 45W (suitable for models with “T”). if need more power, can select maximum value: 200W.
Controller Interface● DB15 pins SMA Male interface of 2 axes of motor drive.● DB25 pins SMA Female interface of 16 channels optoelectronic isolation output ports max back flow current 300mA.● DB25 pins SMA Male interface of 16 channels optoelectronic isolation input ports,max output current 300mA.● USB interface on the front panel, for the convenience of transmitting cutting code.● Extend IO input/output ports, PWM input ports, analog input ports.● Optional standard DB9 core male serial port RS232 interface.Hardware Configuration● Monitor: F2100B, 7 inch 800*480, high definition 16 million colors and high brightness LCD
F2300A, 10.4 inch 800*6000, high definition 16 million colors and high brightness LCD
F2300B, 10.4 inch 800*6000, high definition 16 million colors and high brightness LCD
F2500A, 15 inch Industrial VGA high brightness LCD
F2500B, 17 inch Industrial VGA high brightness LCD
F2500TF-B, 17 inch High resolution Industrial LCD, 260 thousand color LCD
F2600, no display, but supports standard VGA excuse display● Memory: 64M SDRAM● Program space available for user: 256M electronic hard disk● CPU frequency: 400MHz● USB: USB 1.1 front interface, at least 16GB U disk supportable● Keyboard: PCB keyboard● Chassis: full-steel structure completely shielded which defends electromagnetic radiation, interference and static electricity
F2000V 5.0 Pro feature:
Support CAN bus/Cutting parameters Library/Stations configuration
● System upgrade adopts the U disk upgrade method. Convenient, simple and practical. We provide lifetime upgrade service.
● Parameter backup and parameter restore.
● Support four work modes: flame, plasma, mark, demo.
● Flame mode supports automatic height control, two-level preheat, three-level perforation.
● Plasma mode supports arc-voltage feedback, location feedback, auto close height control at corner.
● Support edge cutting, which can reduce preheat time when cutting thick plate.
● Automatic speed limit at the corner, according to the plate thickness, which can avoid overheat.
● Support manually select start line or perforation number.
● Dynamic / static processing graphic display. Support graphic zoom and zoom down, dynamic track the cutting point in zoomed state.
● With power off, breakpoint protection memory function.
● “Offset cutting” can help to avoid material waste caused by nesting calculation error.
● Can set different level of manage permissions and corresponding passwords. Help to protect factory’s right.
● Support remote control with P2P, BCD ( 8421 ) and RS232 serial port.
● Support Laser location.
● Support plasma dynamic perforation.
● Statistics of pieces, working time, perforation count etc.
F2000 Extension models are re-developed which is based on F2000 regular model, allow user to access more functions in one controller.
Mode name | Model | Instruction |
Integrated THC | F2000T | 1. Integrated Torch Height Control function. 3. Option operating panel for voltage ajustment(Mark your model). |
Pipe Cutting | F2000X | 1. Integrated pipe cutting function. Plate and Pipe cutting in one. |
Pipe Cutting&THC | F2000TX | 1. Two Axes pipe cutting support. |
Integrated Drilling | F2000Z | 1. Integrated Drilling and Plate cutting functions. |
Drilling&Pipe Cutting | F2000ZX | 1. Integrated F2000X function. |
Punching&Cutting | F2000P | 1. Support punching technique. |
Built-up Welding | F2000SW | 1. Especially design for Built-up welding and coating. |